|
| |
EGL Vacuum Pumps
All EGL vacuum pumps are 2-stage rotary vane direct-drive pumps which reach an ultimate vacuum of 1x10-4mbar and have ISO-KF-25 flanges on inlets and outlets. All have anti-suckback valves and are equipped with Pneurop flanges, hose nipple, centering ring, O-ring, and clamp. |
| |
VACUUM
PUMP SPECIFICATIONS |
| |
SERIES
A32 |
SERIES
A70 |
SERIES
A107 |
| Free
Air Displacement CFM(L/min)3.2 (90) |
3.2(90) |
7.0(195) |
10.7(305) |
| Oil
Capacity Quarts |
0.825 |
1.0 |
1.0 |
| Motor
Rating (hp/rpm) |
1/3-1800 |
1/2-1800 |
3/4-1800 |
| Weight
(Approx.) lbs.(kg) |
48
(22) |
55
(24.5) |
63
(28.6) |
| Voltage/cycles |
110V/50/60Hz
and
220V/50/60Hz |
110V/50/60Hz
and
220V/50/60Hz |
110V/50/60Hz
and
220V/50/60Hz |
| EGL
Part Number |
721300 |
721400 |
721200 |
| Mist
Eliminator (optional) |
720915 |
720915 |
720915 |
|
| |
| |
#100 VACUUM PUMP OIL (1 liter) Part No. 735200
Incorporates two essential high vacuum characteristics: low vapor pressure which does not materially increase at temperatures up to 50C; and viscosity sufficiently low for use at 15C. Remains fairly constant up to 50C. This oil is recommended to achieve maximum performance of all EGL direct-drive pumps. |
| |
#200 VACUUM OIL (1 liter) Part No. 735210
Superior vacuum oil to #119 that offers lower vapor pressure, less backstreaming and higher flash point temperature. |
| |
FLUSHING OIL (1 gal.) Part No. 735300
Swift, safe removal of harmful sediment and contamination from high vacuum pumps is accomplished by using this specially developed oil. One or two flushings clean accumulated residues and protect pump. Its use considerably improves high vacuum production. Pump can be refilled with operating oil immediately after flushing. This oil is for flushing only, and should not be used for high vacuum operation. |
| |
#43 VACUUM PUMP OIL (1 gal.) Part No. 735100
A custom blended general purpose vacuum pump oil utilizing advanced feedstocks. This economical alternative to molecularly distilled fluids possesses a vapor pressure of 2x10-4 torr at a temperature of 25C. It is particularly useful in applications where frequent fluid changes cause large volumes of fluids to be used. |
| |
