A.)Open main valve and evacuate unit to 1-2mm (Torr). Close main valve.
B.)Switch on bombarder and increase to 250mA. Hold at this setting while maintaining pressure between 2 and 3mm (Torr) with main valve.
C.)When the unit is at 75C/170F, increase current to 400mA.
D.)Maintain pressure between 2 and 3mm (Torr) with main valve.
E.)At 120C/250F, increase current to 650mA, reduce pressure to 1.5 Torr.
F.)When the electrodes are completely red and the glass has reached 230C/450F, open the main valve for a few seconds and then switch off the bombarder.
G.)With the main valve open, allow the tube to cool to around 50C/125F with a vacuum gauge reading less than 5 microns.
H.)Fill the unit with gas.